Skip to content
Request a Quote

test

[mg3d_configurator]

VT CNC Machining 3D
CNC Milling Builder Configure CNC milled metal parts: plate or block stock with milled pockets, grooves, edge steps, and surface finishing options. Every builder includes the Freeform Corner & Region Editor: cut or add material of any shape directly on the 3D model, then submit an RFQ. This tool is for visual configuration only. Final dimensions, tolerances, materials, coatings, and manufacturability will be reviewed from your drawing or specification.
3D PART PREVIEW Visual Specification

CNC Milling Builder

Interactive visual preview for custom CNC machining configuration.

SP SPEC SUMMARY:
Import Code (One-Click Recall)

Save this code before you leave — it is the only way to recall this exact model. If you lose it, your configuration cannot be restored.

SUBMIT RFQ — ENGINEERING REVIEW Your current 3D configuration and specification summary are attached automatically. Attach a drawing if you have one.
Arithmetic verification image

FREQUENTLY ASKED QUESTIONS
What milled features can I configure?

Edge grooves, center pockets/cavities and edge steps with adjustable width and depth on plate or block stock, plus surface treatments such as anodizing, nickel plating, powder coating and black oxide. 3-, 4- and 5-axis setups can be requested.

What tolerances and surface finish can milling hold?

Standard milled tolerances of +/- 0.05 mm, tighter on request, with surface grades from roughing (Ra 3.2) down to fine finishing (Ra 0.4). Tight-tolerance features are reviewed against your drawing.